
by Dan Adkisson
Hockey sticks aren’t one-size-fits-all.
Length is the most obvious differentiator; taller players typically prefer longer sticks. Capitals star Alex Ovechkin’s go-to stick is a league-maximum 63-inches — which matches his 6-foot-3 frame. Former 6-foot-9 Boston defenseman Zdeno Chára’s stick length had to receive an NHL exception for his over-regulation sized stick.
What works for one player, however, may not work for another. Consider Sabres forward Tage Thompson’s desire to use a stick that doesn’t reach the shoulders of his 6-foot-6 frame.
And stick length is just the start. Pros also customize flex ratings, blade curves, lie angles, and tape jobs to get maximum output from their equipment. Here’s a behind-the-scenes look at how NHL players build hockey sticks that deliver precise on-the-ice performance.
Key Components of Stick Customization
Here’s a quick rundown of common customization options for NHL pros.
Flex rating
Hockey sticks are bendy. This bendability provides the snap and speed necessary to get pucks off the blade, down the ice, or into the net. Flex rating is a measure of this bendability; the higher the rating, the more bendable your stick.
More flexible sticks deliver more speed, which provides more power for shots. Stiffer sticks increase control and accuracy. Flex levels typically range from 75 to 100. A stick with a flex rating of 75 requires 75 pounds of force to bend, while a 100 flex rating requires 100 pounds. Most NHL players prefer a flex rating between 85 and 100.
In general, amateur players prefer more flexible sticks because they require less force to produce puck speed.
Blade curve
Stick blades can be curved at the toe, in the middle, or at the heel. Preference depends on playstyle.
Toe curves offer more control over the puck and are great for quick shots and accurate passes. As a result, they’re often preferred by centers.
Heel curves provide more power, making them a popular choice among defensemen who love taking huge slap shots from the blue line.
Mid-curves deliver a balance between power and control, making them great for wingers.
Lie angle
Lie is the angle of your stick in relation to the blade when the blade’s bottom edge is flat against the ice.
The most common lie angle, Lie 5, has an angle of 135 degrees from the blade to the shaft. Lie 4 flattens that to 137, while Lie 6 steepens it to 133.
Lie angles typically correspond with stick height, with shorter sticks having more upright angles. Ideally, you want a lie angle that evenly distributes wear and tear across the bottom of your stick.
Tape job
You’ve got the right height, flex, curve, and lie. Now it’s time to tape. There are four common styles of blade taping: classic, sock, toe, and five-strand.
- Classic: This approach tapes most of the blade, starting at the heel and leaving a small amount untaped at the toe.
- Sock: This method tapes the entire blade from heel to toe, making it look like your stick is wearing a sock. Oilers’ captain Connor McDavid favors a sock approach.
- Toe: Here, taping starts at the midpoint and extends down the toe. The other half of the blade remains untaped for faster puck movement.
- Five-strand: The five-strand is quick and simple. Start just closer to the toe than mid-blade, then do five tape wraps until you reach the toe.
You can also tape your grip. The most popular method is the “candy cane,” which uses a long piece of rolled tape that wraps around the shaft but leaves a gloved finger’s width between each wrap. This creates indentations that make it easier to hold the stick.
Your Stick, Your Rules
Sticks can tell you a lot about a hockey player. Habs goalie Sam Montembeault told NHL.com that he can identify players — and their shooting styles — based on the blade type and taping job of their sticks.
Finding the stick that works for you is all about trial and error. Start with length. Get fitted for a stick that’s in line with your height, then test it out. Feel like you don’t have enough control? Go shorter. Want more speed? Try longer.
Then, go to the tape. Tape your stick however it works for you and start shooting, passing, and controlling pucks. It won’t take long to see where things could improve. If you find yourself losing the puck on dekes, consider curving your blade closer to the toe. If you’re seeing more tape wear on the toe than the heel, get a higher lie. Issues with your heel? Go lower.
Bottom line? Your stick, your rules. Build a stick that helps you get passes to your teammates, snap shots from the slot, and put pucks in the net.
Author assistance from Matt Stathopoulos: He’s a Marketing Manager for ProStockHockey.com, an online retailer specializing in authentic pro stock hockey gear originally made for NHL players. He is a lifelong hockey fan and avid hockey equipment enthusiast. His hockey passion and knowledge are on display in every blog post, social post and fan/customer interaction. Stathopoulos lives and breathes hockey!